Server - Porte da aprire sul router-adsl e firewall per vari tipi di VPN

Siccome ho predisposto un server linux in modalità "gateway" con relativo Firewalle e VPN ero nella necessità di aprire le porte, oltre sul firewall linux, anche sull'eventuale firewall del router adsl

Di seguito le porte aperte:

Here is the list of VPN Ports from my desk:

Porte necessarie per PPTP VPN

- TCP Port 1723
- UDP Port 500 (?)
- permettere IP Type 47 Generic Routing Encapsulation (GRE)
- To allow PPTP tunneled data to pass through router, open Protocol ID 47.

Porte necessarie per  L2TP VPN

- TCP Port 1701
- UDP Port 500 (?)
- To allow IPSec Network Address Translation (NAT-T) open UDP 5500.

Porte necessarie per IPSec/ESP

- UDP Port 500 (?)
- Pass  IP protocol 50 and 51
- Ecco i seguito un interessante articolo che mostra come abilitare il protocollo ID
    http://www.electrictoolbox.com/article/networking/ports-virtual-private-networks/

Spero che possano essere utili per qualcuno

di seguito invece un articolo interessante:


Ecco i seguito un interessante articolo che mostra come abilitare il protocollo ID

http://www.electrictoolbox.com/article/networking/ports-virtual-private-networks/

Un interessante sito per testare le porte:

http://www.canyouseeme.org/

https://www.grc.com/x/ne.dll?bh0bkyd2

...

<------other -----="" articles="" blogs="" related="">

...

SCCM 2012 - How to install AnyConnect VPN with SCCM 2012


Tips - Locating the Cisco AnyConnect Profiles


Linux - Creare un Gateway Server


Backup - Fare il backup delle connessioni di rete e VPN


Tips - Cisco VPN e Vodafone Connect Card


Tips - Cisco errore Secure VPN Connection terminated locally by the Client. Reason 440: Driver Failure.


Tips - Cisco VPN 5.0 e Windows 8